components description
- Idle speed
- Injectors
- Regulator 5v
- Sensor of detonation
CATALOGED DEFECTS
Mass
Burning out of the ignition coil after replacement, the vehicle
still does not work, this is because we have a problem with the ECU grounding,
re-ground the ECU.
Ignition
ignition indicators on the ECU-TEST and ECU-TEST 2 SIMULATOR, stay
on straight, this occurs when the ignition drive or the component responsible
for the ignition has a short circuit, or is malfunctioning, replace the
component, along with a new ignition coil, along with revised wiring harnesses.
Pump relay and/or Main Relay
Non-activation of one of these two relays is connected to the
component connected to the pump relay, replace it to solve this problem, if
this procedure alone does not solve it, also check the processor, carry out dog
replacement is necessary.