components description
- Idle speed
- Injectors
- Regulator 5v
- Sensor of detonation
CATALOGED DEFECTS
Mass
Burning out of the ignition coil
after replacement, the vehicle still does not work, this is because we have a
problem with the ECU grounding, re-ground the ECU.
Ignition
ignition indicators on the ECU-TEST
and ECU-TEST 2 SIMULATOR, stay on straight, this occurs when the ignition drive
or the component responsible for the ignition has a short circuit, or is
malfunctioning, replace the component, along with a new ignition coil, along
with revised wiring harnesses.
Pump relay and/or Main Relay
Non-activation of one of these two
relays is connected to the component connected to the pump relay, replace it to
solve this problem, if this procedure alone does not solve it, also check the
processor, carry out dog replacement is necessary.